top of page

SCHLUTER-DITRA-HEAT-PS is a peel and stick membrane that features a pressure-sensitive adhesive (PSA) to bond the membrane to the substrate, eliminating the need for thin-set mortar. Quick and easy to install, DITRA-HEAT-PS integrates customizable, comfortable electric floor warming with the same functions associated with DITRA-HEAT: uncoupling, waterproofing*, vapor management, and load support to ensure a long-lasting tile installation.

  • Simply remove the transparent release film from the fleece side of the membrane to expose the layer of adhesive, and embed into substrate
  • No thin-set required to install membrane means a faster and easier installation
  • The membrane can easily be repositioned until pressure is exerted
  • Less mess, less cleanup, and fewer tools required
  • The stud structure of DITRA-HEAT-PS is specifically designed to allow for the easy installation of DITRA-HEAT-HK heating cables
  • Nominal 1/4" (5.5 mm) thickness minimizes tile assembly thickness and reduces transitions to lower surface coverings
  • Self-leveling compounds are not required to encapsulate the cables into the membrane
  • Available by the roll or by the sheet to accommodate various room sizes
  • If application area requires a membrane that meets or exceeds requirements of ANSI A118.10, please refer to thin-set versions of DITRA-HEAT and DITRA-HEAT-DUO. Alternatively, the DITRA-HEAT-PS or DITRA-HEAT-DUO-PS membranes may be covered with the SCHLUTER-KERDI membrane, which is certified to meet ANSI A118.10.

SCHLUTER DITRA HEAT PS PEEL & STICK FLOOR WARMING

$31.14 Regular Price
$25.53Sale Price
    • Simply remove the transparent release film from the fleece side of the membrane to expose the layer of adhesive, and embed into substrate
    • No thin-set required to install membrane means a faster and easier installation
    • The membrane can easily be repositioned until pressure is exerted
    • Less mess, less cleanup, and fewer tools required
    • The stud structure of DITRA-HEAT-PS is specifically designed to allow for the easy installation of DITRA-HEAT-HK heating cables
    • Nominal 1/4" (5.5 mm) thickness minimizes tile assembly thickness and reduces transitions to lower surface coverings
    • Self-leveling compounds are not required to encapsulate the cables into the membrane
    • Available by the roll or by the sheet to accommodate various room sizes
    • If application area requires a membrane that meets or exceeds requirements of ANSI A118.10, please refer to thin-set versions of DITRA-HEAT and DITRA-HEAT-DUO. Alternatively, the DITRA-HEAT-PS or DITRA-HEAT-DUO-PS membranes may be covered with the SCHLUTER-KERDI membrane, which is certified to meet ANSI A118.10.
bottom of page